Describe it
Plain language is the whole interface
Say what it should do, where it lives and how it's powered. Indue picks real catalog parts and plans the power budget.
+ Attach a photoGenerate
Build hardware in plain words.
Describe it in a sentence and get the circuit board, the firmware and a case you can print.
Indue Studio · Desk Air PurifierBuilding
in Indue
What you get
- Parts
- 7 · $59.95
- Board
- 92 × 78 mm · 19/19 routed
- Body
- 185 × 185 × 258 mm · 15 pieces
- Firmware
- 7 pins from the netlist
- Electrical check
- 0 errors · 0 warnings
Works with the tools and boards you already use
- Claude Code
- Cursor
- Model Context Protocol
- GitHub
- KiCad
- PlatformIO
- ESP32
- Arduino
- Raspberry Pi Pico
- ESPHome
- Bambu Studio
Claude Code designed a board through the MCP server
How it works
From one sentence to a product you can build, check and test.
What comes back
A real product, not a render
A 185 × 185 × 258 mm printable body shaped around the board, a 120 mm fan and a replaceable filter.
Look inside
X-ray it, then take it apart
The body turns to glass so you can see the real electronics, then every piece comes apart. On a computer, click any part to see what it is, what it's made of and how it goes in.
Routed board
A board made for this product
92 × 78 mm, two layers, 19/19 connections routed. Gerbers go straight to JLCPCB.
Firmware
Firmware written for this board
Generated with the board, not after it: drivers for every part, pins from the netlist, and the behaviour you described. It compiles, and 4 tests check it.
main.cpppins.h✓ compiles
#include "pins.h"void setup() { // PM2.5 sensor on UART Serial2.begin(9600, SERIAL_8N1, PIN_S1_TXD, PIN_S1_RXD); oled.begin(SSD1306_SWITCHCAPVCC, 0x3C); pinMode(PIN_K1_IN, OUTPUT); Serial.println("READY");} void loop() { if (readPms()) fanFollows(pm25); showAirQuality(pm25);}
Parts you can order
7 catalog parts, $59.95
Every part is a real module with pins, outline and mounting holes on file, and links to buy it. The electrical check runs 33 rules before anything is built.
Build guide
Put it together, one step at a time
Every step shows what goes in next, where it sits and what to check before moving on. The same guide the Studio gives you for your own build.
Step 1 of 15 · Board
Check your board
Your board arrives from the factory with its sockets soldered on. Compare it with the picture before you start.
Before you continueLook for bent pins, missing parts or solder bridges. Don't plug anything into USB yet.
Factory files
Files a factory accepts
Gerbers and drill files for the routed board, a KiCad project, and print-ready STL and 3MF for every printed part.
- Size
- 92 × 78 mm
- Layers
- 2
- Routed
- 19/19
- Vias
- 11
8 files: copper, mask, silkscreen, outline and drill.
- B_Cu.gbl
- B_Mask.gbs
- Edge_Cuts.gm1
- F_Cu.gtl
- F_Mask.gts
- F_SilkS.gto
- NPTH.drl
- PTH.drl
Also exported: KiCad tscircuit Wokwi
Digital twin
Catch logic bugs before you order parts
In the Studio, your real firmware is compiled and run against a simulated room: sensor readings in, fan speed and screen out, checked against the tests. It proves the code does what you asked. It can't prove a solder joint, so you still test on the bench. Below is a preview of the purifier's twin.
you / Desk Air Purifier / twin
firmware runningPM2.5 9
GOOD
fan 30%
Light ring: Good
Fan30%
Make something happen in the room
00:00:00 simulated
serial › BOOT desk-air-purifier
serial › READY
- Boots and prints READY pass
- Prints pm25= every 2 swaiting
- Fan speeds up when pm25 risestry cooking
- Screen shows PM2.5 and fan levelwaiting
Start from something that exists. A maker project, an open-source robot or a product you own. Indue takes it apart and builds your version with parts you can buy.
inspiration · maker projects
Made in Indue. Every product opened up, with the board it was designed around.
Drag to browse. Open one to turn it in 3D and click any part.
Smart Pet Feeder
From a product photo · $13 in parts
MicroDuck
Remixed from Pollen Robotics · $56 in parts
Holo Companion Pod
Remixed from a reference · $17 in parts
Home Smart Speaker
Designed from a brief · $18 in parts
Glow Bedside Lamp
From one sentence · $14 in parts
Desk Air Purifier
Designed from a brief · $60 in parts
For developers, the whole engine is yours. A CLI and an MCP server, so your own agent can build hardware too.
- 28 MCP tools
- Your own agent designs, checks and simulates through the same pipeline.
- 100+ catalog parts
- Real pins and outlines. The AI picks parts; it never invents pins.
- 33 electrical rules
- Checked on every change, before anything is built.
- 5 V vs 3.3 VI²C clashesPower budget
- Open formats
- Take your project anywhere.
- STL3MF
Terminal
# A finished example, offline$ indue demo# Design from a sentence$ indue new "a desk air-quality monitor with a screen"# Let Claude Code drive the pipeline$ claude mcp add indue -- indue mcp